MMC FV - FU

Different Frequency Bands Yet One Product

Mavitek MMC AG series receive multicouplers can be used in different sub-bands between 100-500MHz. Whether your area of operation is VHF airband, VHF marine band, UHF DMR, UHF TETRA, or other UHF analog/digital platforms, you can use the same Mavitek receive multicouplers to protect your investment. The multicoupler can be ordered to work up to 950MHz optionally. Please specify your frequency requirement at the time of ordering.

Pre-Selector Bandpass Filter

Mavitek MMC AG series receive multicoupers house a pre-selector bandpass filter with 3 to 5MHz bandwidth. The filter helps the base station with isolating unwanted frequencies which are common on busy radio towers.

Best Signal/Noise Ratio Performance

An in-house designed low noise amplifier (less than 2dB) used in the receive multicoupler units allow for very low signal/noise ratio of the MMC series multicouplers. Typically the signal to noise ratio is between 1dB and 1.6dB.

High Isolation of Ports

MMC AG series receive multicouplers offer high isolation of over 20dB between receiver output ports.

Alternative Power Supply

Depending on your system room / system cabinet design, MMC series multicouplers are able to operate with either 100-240V AC mains power supply, or 12/24V DC power supply. In the event that one of the power sources are lost, the multicoupler automatically switches to the alternative supply, offering flawless operation.

Compact Design

19" rack cabinet mounts with minimum height is considered when designing the MMC AG series multicouplers. 1.5U height is the design form factor up to 8 channel multicouplers, while 16 channel multicoupler is only 2U height. The compact design ensures the multicouplers occupy the minimum space in your system room/cabinet.